HÄNDLE has noticed something of a trend in favour of cross-dredging souring plants. That is quite remarkable, considering that longitudinal-dredging souring plants have been the undisputed front runners ever since the 1990s.
The richly traditioned company HÄNDLE GmbH celebrated three anniversaries in 2010 ...
The WMM models, with mechanical drive, have advanced drives now, with ...
For high-quality mixing – HÄNDLE's
re-engineered double-shaft mixers
Embedded within the 140-year history of HÄNDLE are 120 years of extruder engineering...
Compared to conventional eccentric presses, this concept offers considerable advantages ...
The excavators that HÄNDLE engineered in cooperation with Petersen/Broager are now being manu-factured by HÄNDLE alone ...
What makes Alpha II roller mills so special is, for one thing, that they allow a roller-gap setting of 0.35 mm and ...
This newly engineered extruder, the EX250, with its 200 mm and 250 mm barrel diameters, ...
Multifunctional system for mixing, moistening, steam-heating, kneading, homogenizing, shredding and separating ...
The Pro Original Campaign is a joint initiative by the VDMA and its member companies...
Thank you very much for your visit at our booth.
A contented look back at Ceramitec 2009...
New impulses are what we at HÄNDLE wish all our customers and visitors at Ceramitec 2009 in Munich. HÄNDLE, too, will be doing all to make it happen - with things like
Händle GmbH decides not to participate in Tecnargilla 2008. Nothing against the trade fair – just a case of resources being tied up by heavy demand.
Manufacturers of extruded tiles always find it somewhat problematic to produce accessories which cannot be extruded, such as corner pieces for steps.
The huge success achieved with the extruder series E 75 with 650, 700 and 750 mm barrel diameter, aimed and designed for high throughput rates, made it necessary to adjust the mixer
series upwards.
As far as management goes, Händle GmbH banks on continuity.
Made for small formats and stiff extrusion – HÄNDLE Extruder E 56a/ 40
The new extruder type E 56/ 40 with higher-torque gearing and accordingly higher extrusion pressures completes the well-proven Futura II line.
In the meantime, 15 of these extruders have been sold, and the technology has become so firmly established, that it is now regarded as the benchmark for state-of-the-art multiple-column extrusion of large-format backing bricks.
With a maximum volumetric throughput of some 250 m³/h and a maximum feed size of roughly 1000 mm, the hydraulically powered WMH 818a roller crusher is one of the biggest on the market for the precomminution of hard, cloddy raw materials for ceramics.
With the turn of the year 2009, Mr. Gerhard Fischer (47) assumed his new offices as Joint Managing Director with Mr. John S. Steele (59) of Händle GmbH Maschinen und Anlagenbau.
As wear parts, the parts of preparation and shaping machinery that actually come in contact with the material to be processed are subject to normal attrition.